Share this
How Enterprise Brands Cut Down on Reporting Busywork Across Divisions
by Tim McLain on November 16, 2026
It's Monday morning. Leadership wants last week's wholesale numbers across every brand, region and channel by noon.
So someone in operations pulls an export from one division. Someone in finance pulls another. A sales ops analyst opens a third. Columns don't match. One division reports in euros, another in dollars. Two teams use "open orders" differently. By Tuesday afternoon, a single roll-up exists, and it's already a little stale.
None of that work is analysis. It's pulling, reshaping, reconciling and pasting. At a large apparel, footwear or outdoor brand with several divisions, it happens every week, and it grows each time you add a brand, a region or a channel.
This post is about where that busywork comes from and how enterprise brands cut it down without a multi-year data project.
The Reporting Production Line
Most cross-division reporting follows the same five steps.
- Pull. Each division exports from its own portal, ERP or spreadsheet.
- Reshape. Someone maps each export into a common layout, because the columns, codes and names don't match.
- Reconcile. Currencies, seasons, calendars and definitions get lined up by hand.
- Roll up. The pieces are combined into a view for leadership.
- Answer. Follow-up questions arrive, and each one starts a smaller version of steps 1 through 4.
Here's an illustration, not customer data. A brand with six divisions and five steps has up to thirty handoffs every reporting cycle. Add a seventh division, and you add five more. Nothing in that process gets cheaper as you grow. It only gets longer.
What the Research Says About the Cost
The independent evidence on this is mixed in quality, so here's what we can say and what we can't.
The 2025 FP&A Trends Survey of 459 finance professionals found that 46% of FP&A time goes to data collection and validation. For teams that rely on spreadsheets, manual data collection and validation took 50%. The same survey found that 84% of organizations have multiple data sources that vary in taxonomy and need manual reconciliation (FP&A Trends Group). It's a self-reported survey, and it was sponsored by OneStream, a planning software vendor. It's finance-wide, not wholesale-specific. But the pattern matches what enterprise wholesale teams describe.
Deloitte surveyed senior finance executives (n=614) and found that in almost half of organizations, finance business partners spend the majority of their time creating and updating reports. Spreadsheets, it said, continue to constrain management reporting. The fieldwork ran from March to October 2015, so it's dated, but the pattern hasn't gone away (Deloitte).
Gartner's 2024 survey of FP&A leaders found that only 15% reported having a sustainable delivery model. Gartner described teams as over-extended and "always in reactive mode, juggling complex requests" (Gartner). That's the "answer" step in action.
We found no independent study of reporting effort in wholesale for apparel, footwear or outdoor brands specifically. So treat these numbers as context. They show the shape of the problem, not the size of yours. The best way to size it is to time your own Monday report.
Why Spreadsheets Are the Weak Link
The fix isn't "stop using Excel." The fix is to stop using Excel as the place where numbers get assembled.
Raymond Panko has studied spreadsheet errors for decades. In a 2015 review of field audits of 85 operational spreadsheets, he found errors in 94% of those studied, with cell error rates between 1.2% and 2.5% (Panko, EuSpRIG 2015). The studies were small and not random, and most were done by commercial spreadsheet auditing firms, so don't read it as a rate for your files. But it explains why every manual copy-and-paste step is a place where a number can quietly go wrong, and why teams spend extra time checking each other's work.
Where Multi-Brand Companies End Up
The same story shows up in public filings from multi-brand apparel and footwear companies. We looked at one in detail. In its fiscal 2019 10-K, after separating from VF, Kontoor Brands said that historically its brands "have largely operated independently across geographic regions with regard to management, product design and marketing." It described its recently initiated global ERP implementation and expected efficiencies as it continued to create "a more centralized global organization" (Kontoor Brands 10-K, FY2019). On its Q4 2024 call, CEO Scott Baxter spoke of establishing a "world-class multibrand platform" and of an improved shared platform that "can scale with the addition of Helly Hansen," an outdoor brand (Kontoor Q4 2024 call transcript).
Those remarks aren't about reporting specifically. But they show the direction large brands head: from separate brand-by-brand operations toward shared platforms. Reporting is one of the first places the benefit shows up.
Six Ways to Cut the Busywork
You don't need to do all six at once. They build on each other, so work through them in order.
1. Give every division a code, once
Reporting gets simple when every record carries the same dimension. Decide what a division means in your business: a brand, a region, a business vertical, a channel, or a combination. Then make sure every order, customer, product and inventory record carries it.
RepSpark treats divisions as a core part of its data model. Its developer documentation says divisions "allow you to arbitrarily segment data for security and visibility purposes," and can distinguish elements such as geographical regions, business verticals or brands. A division code can sit on customers, products, inventory, inventory locations and price plans, and it appears in order data too. That means you can segment by division without building a lookup table in a spreadsheet.
Write down what each code means before you map it. Two divisions that think "EMEA" means different things will produce two different roll-ups no matter how clean the data is.
2. Report from the system of record, not from copies
If each division builds its report from its own copy of the data, you'll reconcile forever. Pick the system that owns each fact, let it produce the number, and have reports read from it.
For wholesale, your ERP typically owns shipped, invoiced and net. Your ordering platform owns the order as it was placed. Our post on getting sales, ops and finance looking at the same numbers covers how to define each event once. Do that first. A roll-up built on shaky definitions just reproduces the argument faster.
3. Use a standard report set, filtered by division
Instead of a custom export per division, use one report that every division runs the same way. Change the filter, not the report.
In RepSpark, the Order Summary Report shows booked, canceled, shipped and returned dollars, and for brands with more than one division you can view one or all. In July 2026, RepSpark brought a Core Reporting Suite of ten reports into Flow, including Orders Overview, Orders Cross-tab, Order Summary Status, Salesperson Performance, Top Accounts and Top Products. The Orders page brings Orders, External Orders, Invoices and Payments into one place, where External Orders shows orders that didn't start in RepSpark. You can export the current Orders view to CSV, and the Availability Report exports to Excel or PDF.
One caution. Not every report documents a division filter. The Orders page lists filters such as status, order source and customer, but no division filter in its documentation. Before you design your weekly view, confirm with your RepSpark team which reports filter by division and which you'll need to cut another way.
4. Let people see their own division
A lot of reporting work isn't reporting at all. It's one person pulling a number for another. When a division head can open the report for their own division, the request disappears.
RepSpark users can be limited to a division, and users with several divisions switch between them on the same site. That keeps a regional sales director in their lane, and lets a portfolio leader see across all of them.
We found no independent study that quantifies how much self-service reporting reduces ad hoc requests. So treat this one as logic, not a proven result. Count the requests your team handles in a month, put division views in the right hands, and count again.
5. Decide currency, calendar and season rules in writing
Mixed currencies and calendars are where roll-ups go wrong quietly. Decide, once, which currency leadership sees, what exchange rate applies and when it's set, how seasons map across divisions, and which date basis each metric uses.
Orders in RepSpark carry a currency code, and RepSpark improved multi-currency support in July 2026. The documentation we reviewed doesn't say whether report totals are converted to one currency or shown per currency, so ask how your roll-up will treat them. Whatever the answer, write the rule down in the same one-page dictionary you use for definitions.
6. Automate the roll-up last
Automation locks in whatever process sits underneath it. If you automate the weekly roll-up before you've fixed codes, definitions and sources, you'll automate the confusion.
Once steps 1 through 5 are solid, look at how the numbers get from your platform to the place leadership reads them. Ask whether reports can be saved, scheduled or exported on a regular cadence, and how data can flow into the BI tool your team already uses. RepSpark's developer documentation focuses on syncing ERP data in. It documents an order export, but we didn't find a documented reporting API or BI connector, so ask your RepSpark team what's available for your setup.
What This Looks Like at a Multi-Division Brand
5.11 Tactical is a good example of the starting point. Its case study describes a business operating across multiple divisions and countries, with separate platforms and no central place to view real-time inventory. The result was that 5.11 unified three separate systems on RepSpark. The case study doesn't quantify the time savings on reporting, so we won't claim any. But it's the same shape as the problem here: several divisions, several systems, one view needed.
Questions to Ask Any Platform
Use these on your current platform and on any you evaluate.
- Can every order, customer and product record carry a division code?
- Can standard reports filter by division and show all divisions at once?
- Can a user be limited to one division, or to several, without a custom build?
- How are currencies handled in report totals?
- Can reports be saved, scheduled or exported on a regular cadence?
- How does data reach our BI tool, and what can't be exported?
If the answer to any of these is "someone exports it and fixes it in Excel," you've found your busywork.
How RepSpark Helps
RepSpark is the wholesale platform for brands and their retailers, built to connect to your ERP, with 20+ ERPs and 35+ integrations supported. Divisions are part of the data model, so customers, products and inventory carry a division code, users can be limited to the divisions they work in, and the Order Summary Report can show one division or all of them. The Flow Core Reporting Suite and the Orders page give teams a standard place to look instead of a one-off export.
To see how this fits an enterprise setup, read about RepSpark for enterprise brands, how ERP integrations work, and what the platform offers operations teams, IT teams and leadership. For recent reporting releases, see Features and Updates. If you want to see your own divisions in one view, schedule a demo.
For more on what breaks when platforms don't connect, read what problems arise when enterprise brands rely on disconnected wholesale platforms. For the rep-facing side of reporting, see rep reporting and team communication for wholesale.
Frequently Asked Questions
Why does reporting across divisions take so much manual work?
Each division usually exports from its own portal, ERP or spreadsheet, and the exports don't match in columns, codes, currencies or definitions. Someone has to reshape, reconcile and combine them before leadership sees a roll-up. Every new division adds another export and another round of reconciling, so the work grows with the business.
How much time do finance teams spend on manual data work?
Surveys suggest it's a large share. The 2025 FP&A Trends Survey of 459 finance professionals found 46% of FP&A time goes to data collection and validation, and 50% for teams that rely on spreadsheets. That survey was sponsored by a software vendor and covers finance generally. We found no independent study specific to wholesale reporting, so time your own process to size it.
What is a division in a wholesale platform?
A division is a way to segment data, such as by brand, region, business vertical or channel. In RepSpark, divisions segment data for security and visibility, and a division code can sit on customers, products, inventory and price plans. How you define a division is a business decision, so write down what each code means before you map it.
Can one report show all divisions at once?
In RepSpark, the Order Summary Report can show one division or all of them for brands with more than one division. Not every report documents a division filter, so confirm which ones filter by division before you design a weekly view. A good standard report changes by filter, not by building a new export for each division.
How do we handle multiple currencies in a roll-up?
Decide in writing which currency leadership sees, what exchange rate applies and when it's set. Orders in RepSpark carry a currency code, but the documentation we reviewed doesn't say whether report totals are converted or shown per currency. Ask your platform team how totals are treated, and put the rule in your metric dictionary.
Does role-based access really reduce report requests?
It should, because division heads can open their own reports instead of asking someone to pull them. But we found no independent study that quantifies the effect, so treat it as a logical benefit, not a proven number. Count the requests your team handles for a month, give people division-level views, and compare.
Should we automate the roll-up right away?
Not first. Automation locks in whatever process sits underneath it. Fix division codes, definitions, currency and calendar rules, and the source of each number first. Then automate how the roll-up gets from your platform to your BI tool or leadership view.
Where should a brand start?
Time one weekly report from start to finish and list every handoff. Then assign each division a code, write down the definitions each team uses, and pick the system that owns each number. Our post on getting sales, ops and finance looking at the same numbers covers the definitions step in detail.
Sources:
Share this
- Industry Trends (314)
- B2B ECommerce (129)
- Client Spotlight (121)
- Sales (62)
- Features (51)
- News (51)
- Enterprise (38)
- Growing Great Brands (37)
- Golf (35)
- Trade Shows (23)
- Footwear (10)
- Awards (9)
- Outdoor Lifestyle (7)
- Partners (6)
- Fishing (5)
- Sustainability (5)
- Tactical Brands (4)
- Golf Genius (3)
- New Customer (3)
- Opinion (3)
- Pickleball (3)
- Fitness (2)
- Feature Sneak Peek (1)
- November 2026 (12)
- October 2026 (25)
- September 2026 (46)
- August 2026 (53)
- July 2026 (39)
- June 2026 (85)
- May 2026 (98)
- April 2026 (3)
- March 2026 (5)
- February 2026 (8)
- January 2026 (10)
- December 2025 (9)
- November 2025 (8)
- October 2025 (12)
- September 2025 (11)
- August 2025 (9)
- July 2025 (16)
- June 2025 (7)
- May 2025 (7)
- April 2025 (14)
- March 2025 (12)
- February 2025 (10)
- January 2025 (11)
- December 2024 (11)
- November 2024 (13)
- October 2024 (12)
- September 2024 (6)
- August 2024 (9)
- July 2024 (7)
- June 2024 (8)
- May 2024 (7)
- April 2024 (1)
- March 2024 (3)
- February 2024 (1)
- January 2024 (6)
- December 2023 (1)
- November 2023 (2)
- October 2023 (2)
- September 2023 (2)
- August 2023 (10)
- July 2023 (3)
- June 2023 (4)
- May 2023 (4)
- April 2023 (7)
- March 2023 (4)
- February 2023 (2)
- November 2022 (1)
- October 2022 (2)
- September 2022 (1)
- August 2022 (2)
- July 2022 (2)
- May 2022 (1)
- January 2022 (2)
- November 2021 (1)
- October 2021 (5)
- September 2021 (1)
- July 2021 (2)
- June 2021 (1)
- March 2021 (4)
- February 2021 (2)
- January 2021 (2)
- December 2020 (4)
- November 2020 (1)
- October 2020 (1)
- September 2020 (1)
- August 2020 (2)
- July 2020 (2)
- May 2020 (1)
- April 2020 (3)
- March 2020 (1)
- February 2020 (1)
- January 2020 (2)
- December 2019 (3)
- November 2019 (1)
- October 2019 (5)
- September 2019 (2)
- August 2019 (2)
- July 2019 (5)
- June 2019 (1)
- September 2018 (2)
- February 2018 (2)
- January 2018 (1)
- November 2017 (2)
- October 2017 (2)
- August 2017 (1)
- June 2017 (3)
- May 2017 (3)
- April 2017 (1)
- March 2017 (1)
- February 2017 (1)
- January 2017 (2)
- October 2016 (1)
- September 2016 (1)
- August 2016 (4)
- June 2016 (2)
- May 2016 (1)
- April 2016 (3)
- March 2016 (2)
- February 2016 (3)
- June 2015 (1)
- November 2014 (1)
- August 2014 (2)
- July 2014 (1)
- May 2014 (1)
- January 2014 (1)
- December 2013 (1)
- June 2013 (1)
- May 2013 (1)

